The BMW F800GS kit is very compact and includes everything you need to make the installation easy. This has become one of our most popular sellers. The kit includes the steering stabilizer and heat treated linkarm, a new one piece billet SUB mount handlebar perch assembly, two adaptor spacers, 10mm bolts, stainless steel billet frame bracket with adjustable tower pin and a special Torx bit to remove some of the bolts. Also included are the step by step pictured instructions and Owners's Manual. The stabilizer makes a serious difference in the handling characteristics on this model. This kit raises the bars approximately 20mm and forward about 3mm. The text below this is generic SUB MOUNT text that does not necessarily apply to the BMW F800GS which is a unique SUB mount kit.
"SUB" mount stands for Stabilizer Under Bars, originally designed for raising the bars. These kits are designed for use with Oversize bars. "Bar reducers" are available as an option, to convert the kit to standard diameter bars, should that be desired. This concept allows more room for other equipment such as, Global Positioning Systems(GPS) or Enduro/Rally computers and yet still retain the quick access for adjusting the stabilizer. This is also good for the taller rider who wants his bars a little higher, as it raises the bar location approximately 11-25mm, depending on the model of bike. In some cases, you might consider a lower bend handlebar bend at the same time, unless you are trying to achieve a higher bar height along with your stabilizer installation. We can also help you with other handlebar choices to match your desired setup, as we have a full selection of handlebars to choose from on this website. The SUB mounts are only available on certain models based on the physical limitations of mounting in this area. Each SUB mount comes complete with all necessary parts, hardware and "Step by Step" pictured instructions. If you have any questions, feel free to call or email us.