$ 370.00

Out of stock

The DENALI D2 2.0 LED TriOptic™ LED light kit with DataDim technology produces a remarkable amount of light in a very compact package that is perfect for all styles of riding and types of motorcycles. With a powerful 10-watt Cree LED, the DENALI D2 casts a powerful beam 525ft down the road.


Housed in compact aluminum pods measuring just 2.2in in diameter and 2.4in deep, the D2 LED lights are perhaps the most versatile design available; powerful enough to be your “primary” driving light yet small and light enough to comfortably mount on a fender. The DENALI D2s feature durable black powder-coated finishes and special cooling fins to make sure the LED itself runs cool and bright. New for the DENALI 2.0 series is a special Impact PC™ corrosion proof bezel that ensures your lights will continue to look great even after repeated stone and debris impacts. Low profile hinge mounts offer secure mounting and include stainless steel M8 mounting hardware for installation on light bars or model specific light mounts.

The D2 2.0 kit uses a just-developed HotSwap™ modular wiring harness that, by default, causes these single intensity lights to function at full brightness. But if you would like them to operate at both half and full power, simply add the dual intensity DataDim™ controller. No other changes are required except to replace the original relay with the DataDim™ module and connect one wire to the high-beam circuit. (You can also purchase a three-position switch to manually control light intensity independent of the bike’s high beam.)

Also new with the DENALI 2.0 generation of lighting is the industry-leading TriOptic™ lens system. Each lamp comes with both spot (installed) and flood (supplied) lenses, nothing else to buy. The spot lens produces the greatest beam distance, while the flood lens produces a broader spread of light closer to the motorcycle, filling the road edge and shoulders. To get the best of both worlds, use a spot lens on one light and a flood lens on the other light for distance illumination and a useful spread of light at close range. The flood lenses E-Marked to be road legal in countries where this is a requirement. No matter which lens you choose, the D2 2.0 light kit lets you see the road (or lack thereof) and be seen by other traffic around you. It’s that simple: See further, be seen better, with DENALI!

Specifications:

  • LEDs 10 Watt Cree XPL HI (per lamp)
  • Power Draw: 1.6 amps (total)
  • Beam Distance (spot): 525ft
  • Beam Width (spot): 75ft
  • Raw Lumens: 2190
  • Intensity: Single Intensity Harness
  • DataDim™ Compatible: Yes
  • Operating Voltage: 12v
  • Pod Size 2.2in diameter x 2.4in deep

D2 Kit Contents:

  • (2) LED Light Pods
  • (2) Clear Spot lenses (pre-installed)
  • (2) E-Mark approved elliptical flood lenses (Clear)
  • (2) Amber Spot lenses
  • (2) Amber elliptical flood lenses
  • (1) HotSwap™ single intensity wiring harness
  • (1) DrySeal™ waterproof illuminated switch
  • (1) 7/8in Handlebar switch mount
  • (1) 1in Handlebar switch mount
  • (2) Hinge mounts with M8 stainless steel hardware
  • (4) Zip ties & (1) adhesive mounting square

 

DENALI 2.0 LED Auxiliary Lighting Guide

Designed specifically for motorcycles, the DENALI 2.0 LED TriOptic auxiliary lights with DataDim technology maximize visibility in an extremely durable, efficient, compact yet very powerful package.
DENALI 2.0 LED TriOptic Auxiliary Light Kits
TriOptic lenses feature spot and either flood or hybrid options to customize your illumination needs while DataDim technology provides dual intensity with the addition of a plug and play module. With black powder coated cooling fins to keep the LEDs cool and operating at full strength, an Impact PC corrosion proof bezel protecting the front of the lights from stone chips, and DrySeal submersible waterproof construction, your way will be clear no matter the conditions.
 
DENALI DM 2.0
LED TriOptic Light Kit

395ft maximum range
2190 raw lumens
1.7in width
1.6 amp total draw
Includes spot & flood lens

DENALI D2 2.0
LED TriOptic Light Kit

525ft maximum range
2190 raw lumens
2.2in width
1.6 amp total draw
Includes spot & flood lens

LED TriOptic Light Kit
1000ft maximum range
2190 raw lumens
3.7in width
1.6 amp total draw
Includes spot & True-Hybrid lens

DENALI D4 2.0
LED TriOptic Light Kit

800ft maximum range
8760 raw lumens
3.9in width
6.6 amp total draw
Includes spot & True-Hybrid lens

DENALI 2.0 Light Specific TriOptic Amber Lens Kits
DENALI 2.0 TriOptic amber lenses are an optional accessory for added daytime visibility and fog-cutting performance. Each kit includes a set of amber spot lenses as well as a set of amber flood or True-Hybrid lenses, allowing you to select one or both options to customize your illumination.
DENALI DM 2.0
Amber Lens Kit

Replacement lens kit
Includes spot & flood lens

DENALI D2 2.0
Amber Lens Kit

Replacement lens kit
Includes spot & flood lens

DENALI DR1 2.0
Amber Lens Kit

Replacement lens kit
Includes spot & True-Hybrid lens

DENALI D4 2.0
Amber Lens Kit

Replacement lens kit
Includes spot & True-Hybrid lens

DENALI 2.0 TriOptic LED Light Kit Accessories
DENALI 2.0 accessories expand the functionality of your existing DENALI 2.0 TriOptic Light Kit
DENALI 2.0 DataDim
Dual Intensity Controller

Plug this module into your DENALI 2.0 TriOptic Light Kit to allow switching between full and half intensity with your high beam switch

DENALI 2.0 Hi-Low-Off
Waterproof Switch

Replace the standard On-Off switch in your DENALI 2.0 TriOptic Light Kit to enable independent control of your DataDim Dual Intensity Controller

Allows installation of a second pair of DENALI 2.0 TriOptic Light Pods on your existing DENALI 2.0 TriOptic Light Kit



DENALI 2.0 Light Harness Extension
Single 24 inch plug and play harness extension allows expansion of your existing DENALI 2.0 TriOptic Light Kit mounting options

 

JUST SEEN

Search

Just added to your cart:
Qty:
Total:
Subtotal:
Excl. postage 
My Cart
Just added to your wishlist:
Excl. postage 
My Wishlist