New Rox 2 inch pivoting risers for the new R1200GS Liquid Cooled bikes that come with the larger diameter 1 ¼” handlebars. These risers will NOT work on the older R1200GS’. The risers come with caps to replace your OEM clamping caps. We had to use our own caps to clamp the risers because the OEM caps are too tall. We wanted to make sure all stock cables and brake lines could be used with these risers. Making this riser a 2 inch rise and supplying our own replacement caps was the best way to do that. Anodized Clear. Always check and confirm that your vehicle has adequate cable and brake line length before installing any handlebar risers.
Pivots Forward/Backward depending on rider preference. Note: These risers aren’t designed to be positioned straight up because it can be difficult to access the BMW bolts to tighten the stem of the riser in place. For riders looking to go directly up from where the bar is currently we recommend our fixed position risers instead.
Works with Stock Cables — see our cable rerouting instructions below
Note: Test fitment on the S1000XR is limited. Longer brake line or brake line extension along with other cables may be required. We have also found these risers to work on other bikes with 1 1/4" factory handlebars, including the Indian Chieftan/Roadmaster. See this link for more info.